Iron on vinyl
Sizes vary per set, most are around or less than 2in x 2in
This is a DIY project, you only receive the vinyl and you iron it on a shirt yourself!
If you are just ordering a piece iron on vinyl and nothing else the vinyl with be shipped via Stamped Mail
*Ironing instructions
1.) Preheat iron to about 300°F/148°C ("Wool" Setting appears to be the closest)
2.) Remove wax paper back
3.) Place vinyl sticker on fabric
4.) Iron the vinyl for 15-20 seconds with applying pressure
Be VERY CAREFUL it will be EXTREMELY HOT. Wait for the fabric to COOL a bit first. But it still needs to be warm when you peel.
5.) Check the vinyl by lifting up the clear plastic piece a tiny bit.
A.) If the vinyl is sticks to the fabric finish gently lifting the clear plastic off
B.) If the vinyl is not sticking to fabric, continue Ironing for 5 seconds intervals and checking until it sticks.
Washing instructions
Do NOT wash for the first 24 hours after applying
Machine wash safe
Turn inside out
Cold water
Air Dry or dry on low heat
Do not dry clean and do not bleach
If you have any questions feel free to message me and ask!